Battery charger for lithium-ion batteries in motorcycles and scooters

Citomerx battery charger for lithium-ion batteries for motorcycles and scooters

DESCRIPTION:
Charger for Lithium- Iron Phosphate batteries (LiFePO4) for various motorized two-wheelers (motorcycle, scooter, ATV/ Quad), based on a two-stage charging system ("CC to CV"). When charging a LI- battery, the charger first delivers a constant current charge. Thus the battery quickly reaches the specified final charging voltage. The charger then switches to a constant voltage mode to continue charging the battery continuously.

TECHNICAL DATA:
- especially for charging lithium-ion batteries with iron phosphate cathodes, so-called LiFePO4 batteries
- LED display (red: battery is charging, green: battery is fully charged)
- Input voltage: AC 100-240 V, 50-60 Hz
- Constant voltage: 14.6 V
- Constant current: 1.0 A
- Dimensions of the connector part: approx. 80x53x34 mm
- Length of the battery terminals: approx. 80 mm
- max. opening width of the battery terminals (max. diameter of the battery poles): approx. 28 mm
- Material (cover): plastic

PROCEDURE FOR CHARGING THE BATTERY:
- Connect the charger to the battery. Observe the "positive (+ red) and negative (- black) poles".
- Only then connect the charger to the mains socket.

SAFETY INSTRUCTIONS:
- Use the charger indoors if possible and never in rain or wet conditions!
- When the battery is charged, first remove the plug from the socket. Then remove the charger from the battery.
- Do not use the device near explosive gases or sparks. When charging, the charger should be stored in a well-ventilated room to avoid overheating.
- Use the unit only with 12V lithium batteries. (For example, if the charger is used for 10V batteries, the battery may explode).
SCOPE OF DELIVERY:
✔ Citomerx Battery Charger for Lithium Ion Batteries