Charger for battery 24 V 10Ah lithium ion NEW for e-bikes, pedelecs, electric bikes...

When the battery of your e-bike runs out of juice, the only thing that helps is the power socket...

DESCRIPTION:
Here you find the suitable charger (from Citomerx) for the E-Bike battery 24V 10Ah, which is installed in many E-Bikes and Pedelecs. Whether as a replacement charger, because the old one is defective, or as a second device - this charger does its job reliably. The charger housing is also small and space-saving, so it can easily be stored in a backpack or bicycle bag.

TECHNICAL DATA:
- Charger for battery 24V 10Ah (electric bicycle) from Citomerx
- Battery charger Model: LBC070301
- Input: AC 100-240V, 50-60 Hz, 2.2A
- Output: 29.4V
- LED display for charging status (red= device is switched on, red/green= charging is in progress, green= charging completed)
- Dimensions: approx. 12,5x 6,6x 4,2cm

IMPORTANT NOTES:
Before buying, please check if your e-bike has the appropriate battery for the charger!
Procedure for charging the battery
1. make sure that the connection cables are connected correctly
2. compare the output voltage of the battery with that of the charger and make sure that they match
3. connect the plug of the charger to the battery and only then plug the charger into the socket
Notes for the battery display
Red light: In operation, no connection to battery
Orange light: Battery charging
Green light: battery is fully charged
Troubleshooting
1. Possible problem: The red light is off although the device is operating:
Solution: Check that the charger input connector is plugged into the socket. If there is current flowing from the output, please return the unit for repair.
2. Possible problem: The red light does not light up during charging
Solution: Check that the battery and charger connections are properly connected. If this is the case and the battery is still not fully charged, the battery may be defective.
3. possible problem: the red light suddenly turns green
Solution: Check that the battery is fully charged. If not, the charger may be defective. Please send the charger back for repair!
Safety Instructions
1. use the charger in closed rooms if possible and never in rain or wet conditions!
2. when the battery is charged, please first remove the plug from the socket. Then you can remove the battery from the charger.
3. do not use the charger near explosive gases or sparks. When charging, it is best to store the charger in a well-ventilated room.
4. use the device only for 24V lithium batteries.

SCOPE OF DELIVERY:
✔ 1x charger with connecting cable for the socket