Charger for battery 36V 10Ah LI spare battery frame for E-Bike Pedelec electric bike e.g. Prophete

Citomerx charger for E-Bike battery 36V/10AH

DESCRIPTION:
When your e-bike's battery runs out of juice, the only thing that helps is going to the wall socket... Here you find the suitable charger (from Citomerx) for the frame battery 36V 10,4Ah, which is built in many E-Bikes and Pedelecs. Whether as a spare charger or as a second device - this charger does its job reliably. The charger housing is also small and handy, so it can be easily stored in a backpack or bicycle bag.

TECHNICAL DATA:
- Model: LBC100201
- Input: 100-240VAC, 50/60 Hz., 90W
- Output: +42V
- Connection: round, 3 pins
- Charge indicator: red light = switched on and charging is in progress / green light = charging completed
- Dimensions: 6.90 cm x 16.80 cm x 4.0 cm

FITTING FOR:
The charger is suitable for Citomerx Lithium-Ion batteries with 36V/10,4 AH and round 3-pin connector. Please compare the connection to your e-bike battery before buying!

IMPORTANT NOTES:
Please check before buying, if your E-Bike has the appropriate battery for the charger!
Procedure for charging the battery
1. make sure that the connection cables are correctly connected
2. compare the output voltage of the battery with that of the charger and make sure that they match
3. connect the plug of the charger to the battery and only then connect the charger to the socket
Notes for the battery display
Red light: In operation, no connection to battery
Orange light: Battery charging
Green light: battery is fully charged
Troubleshooting
1. Possible problem: The red light is off although the device is in operation:
Solution: Check that the charger input connector is plugged into the socket. If there is current flowing from the output, please return the device for repair.
2. Possible problem: The red light does not light up during charging
Solution: Check that the battery and charger connections are properly connected. If this is the case and the battery is still not fully charged, the battery may be defective.
3rd possible problem: The red light suddenly turns green
Solution: Check that the battery is fully charged. If not, the charger may be defective. Please send the charger back for repair!
Safety Instructions
1. use the charger indoors if possible and never in rain or wet conditions!
2. when the battery is charged, first remove the plug from the socket. Then you can remove the battery from the charger.
3. do not use the device near explosive gases or sparks. When charging, it is best to store the charger in a well-ventilated room.
4. use the device only for 24V lithium batteries.

SCOPE OF DELIVERY:
✔ Citomerx charger LBC100201 with connection cable