3x3 Naraku Sport clutch springs for 50cc scooters and quads with Minarelli engine

A centrifugal clutch is installed so that the power in your variomatic transmission can be properly connected to the rear axle. At higher engine speeds, the centrifugal forces automatically increase and the clutch shoes push outwards against the bell housing. In order to lock the clutch only at a certain speed, the shoes must be held by the springs.

In the case of tuned scooters, the maximum power can usually be higher than the engagement speed of a standard model. For optimum performance,
firmer springs should be fitted to ensure that your clutch only engages at the desired speed.

Order these clutch springs from the manufacturer Naraku. This will allow you to adjust your variator optimally.

Scope of delivery:

- 3x clutch spring white
- 3x clutch spring red
- 3x clutch spring black

Technical data:

- Naraku clutch springs for original and Naraku Sport clutches in 50cc scooters and quads with Minarelli engine
- for tuning to the desired starting speed
- the engagement speed is printed on the spring and is indicated by different colors

Attention: this number does not correspond to the engine speed, as the engine speed is reduced by the variator when starting !