Variomatic weights Variomatic rollers 19x15.5 5.7g

Irregular engine running at idle usually indicates old, hardened or brittle intake manifolds.

DESCRIPTION:
The engine draws false air and therefore runs noticeably lean. In the worst case, the engine could run hot and, in the case of extreme air leakage, even various cost-intensive defects could occur. It must not come so far.

With our intake manifolds in OEM quality, you do everything right. The design and dimensions of the intake manifold correspond to the original and can be replaced without any problems.
Note:
The intake ports of the front and rear cylinders are almost identical, but differ slightly in angle. Therefore it is essential to pay attention to the correct assignment (2 open ports at the front - 1 open port at the rear) during installation, otherwise the carburettor battery is very difficult to insert and draws in false air.

TECHNICAL DATA:
- for the front cylinder
- replaces original part Yamaha OE 24M-13596-01
- incl. seal
- Passage: 38mm
- Carburettor connection: 47mm
- Hole distance "hole centre to hole centre": 76mm

SCOPE OF DELIVERY:
✔ 1x intake manifold for front cylinder(new)

FIT FOR:
YAMAHA
- XV 1000 SE Midnight Special (23W), BJ 1983-1985
- XV 1000 Virago (2AE), FY 1986-1988
- XV 750 Virago (4FY), FY 1992-1994
- XV 750 Virago (4PW), FY 1995-1997
- XV 1100 SP Virago (3LP), year 1996-1999