Malossi racing cylinder MHR Replica 70cc for Aprilia, Derbi, Gilera, Piaggio

Pure torque ...

The 70cc MHR Replica from Malossi is the road-going version of the MALOSSI MHR and one of the most powerful kits for "everyday use". The high-torque aluminum cylinder achieves 7.35 N.m at 8,000 rpm, with an additional 9 hp at 8,500 rpm pushing you forward. However, the peak values are far higher. The aluminum cylinder base guarantees constant thermal cooling even under high loads. The Nikasil coating also ensures that the piston track is particularly hard and forgives the odd jam.

• Technical data:
• Aluminum racing cylinder
• 70 ccm 2-stroke water-cooled
• Cylinder head Ø 47.0 mm
• Piston pin Ø 12.0 mm
• 6 transfer ports
• 10.800-11,800 rpm
• High-strength chrome/Nicasil-coated cylinder bore, tightened timing, increased compression ratio
• Vmax up to approx. 120 km/h possible
  
• Tip:
• Sports variator, 17.5 mm carburetor and racing exhaust further increase performance
• Longer gear ratio, 19/21 carburetor, SPORT-Racing racing exhaust are recommended
  
• Scope of delivery:
• 1x cylinder kit (new)
  consisting of:
• 1x cylinder head
• 1x piston incl. piston pin, 2x piston rings, 2x piston clips
• 1x gasket set consisting of cylinder head and base gaskets
• 1x manifold gasket
• 1x piston pin bearing
• 2x manifold fastening screw
• 3x fixing screw
• 1x intake manifold
• 2x set of vanes