Malossi racing cylinder MHR Replica 68ccm for Daelim, Hercules, Peugeot, Sachs

Get out of the power hole with the Malossi racing cylinder MHR Replica ...

DESCRIPTION:
At 7.35 N.m at 8,000 rpm, Malossi's 68cc MHR Replica aluminum cylinder offers one of the biggest power increases for everyday use. However, peak values far above these figures are also possible. The aluminum cylinder base allows for sustained thermal cooling even at the highest loads.

ADVANTAGES:
- High strength chrome/nicasil coated raceway
- tighter timing
- increased compression
- top performance

TECHNICAL DATA:
- Type: racing cylinder
- Material: aluminum
- Power: 68 ccm / 2-stroke / air-cooled
- Cylinder head: Ø 47.00 mm
- Piston pin: Ø 12.00 mm
- Overflow: 6
- rpm: 10.800 - 11.800
- Vmax: up to approx. 120 km/h possible
- Manufacturer number: 318640

FIT FOR:
The Malossi racing cylinder MHR Replica is suitable for the following vehicles, for example: Peugeot Buxy 50 2T, Peugeot Vivacity 50 2T

INSTALLATION TIPS:
Sport variator, 17.5 mm carburetor and a sport racing exhaust are mandatory!
Recommended is a longer gear ratio, 19/21 carburetor and a sport racing exhaust.

IMPORTANT NOTICE:
The periphery like exhaust, carburetor and transmission MUST be changed!

WARNING:
The manufacturer declines any responsibility arising from the use of the products outside the legal framework. The manufacturer and user are responsible for all legal consequences.

SCOPE OF DELIVERY:
1x cylinder
1x cylinder head
1x piston incl. piston pin, 2x piston rings, 2x piston clips
1x gasket set consisting of cylinder head, base gaskets
1x manifold gasket
2x manifold fixing screw
1x set of fins