Fork oil seals dust cap set 43x55x9.5mm for Honda, Kawasaki, Suzuki, Triumph, Yamaha

Are you looking for new fork seal rings and want the matching dust caps to go with them? Then you have come to the right place!

DESCRIPTION:
A dirty stanchion is probably the least of your problems with leaking fork seals. Worse is an impairment of the damping, which could result in a deterioration of the road holding. Even greater damage, for man and machine, can be caused by leaking oil, which gets onto the brake system and makes it useless. Order today and make your vehicle safe again!
The dust caps seal the stand pipe with the help of a sealing lip. This sealing lip is flexible and has a slightly smaller diameter to fit directly to the standpipe. In addition, a spring ensures an even firmer and perfect hold. A second spring also provides an even better seal for the Simmerring.
This fork oil seals and dust cap set is suitable for the vehicles of Honda, Kawasaki, Suzuki, Triumph and Yamaha. The inner and outer diameter of the dust caps is 43mm and 59mm. 55mm is the press-in diameter. The Simmerrings have the dimensions 43x55x9.5mm (inner diameter x outer diameter x depth/width/height).
Watch out! When replacing the radial shaft seals, we recommend always replacing them on both sides.

TECHNICAL DATA:
Simmerring
- inner diameter: 43mm
- outer diameter: 55mm
- height: 9,5mm
- Colour: black
- 3-fold sealing (2x spring, 1x sealing lip)
- Reference number: All Balls 55-123, Ariete ARI 072, Athena P40FORK455089 / P40FORK455057

Dust cap
- inner diameter: 43mm
- Outer diameter total: 59mm
- press-in diameter: 55mm
- Colour: black
- Sealing lip with additional spring
- Reference number: All Balls 57-102, Athena P40FORK455098

Set
- Comparison number: All Balls 56-137, Tourmax FSD-030R

SCOPE OF DELIVERY:
✔ 2x fork seal rings
✔ 2x dust caps