Fork oil seals dust cap set 43x55x9.5 / 10.5mm for Kawasaki, Suzuki, Yamaha

Are you looking for new fork seal rings and want the matching dust caps to go with them? Then you have come to the right place!

DESCRIPTION:
Leaky fork seals, also called oil seals, cause oily and dirty standpipes. A dirty stanchion is the least evil here. It can also impair the damping, which results in a deterioration of the road holding. But worst of all: leaking oil could get to the brake system and render it useless. Change now and get a whole new driving experience. The classic sealing lips on the dust caps provide optimum protection against dirt. Due to their flexible material and the slightly smaller diameter, they lie directly against the standpipe and thus seal it. This fork seal and dust cap set is suitable for Kawasaki, Suzuki and Yamaha vehicles. The inner and outer diameter of the dust caps is 43 mm and 60 mm respectively. 55 mm is the press-in diameter. The Simmerrings have the dimensions 43x55x9.5/10.5 mm (inner diameter x outer diameter x depth/width/height). Small tip: When renewing the radial shaft seals, they should always be replaced on both sides.

TECHNICAL DATA:
Simmerring
- inner diameter: 43mm
- outer diameter: 55mm
- Height: 9,5 (10,5mm incl. sealing lip)
- Colour: black
- Reference number: All Balls 55-123, Ariete ARI 072, Athena P40FORK455089 / P40FORK455057

Dust cap
- inner diameter: 43mm
- Outer diameter total: 60mm
- press-in diameter: 55mm
- Colour: black
- classic sealing lip
- Reference number: All Balls 57-102

Set
- Comparison number: Tourmax FSD-043R, All Balls 56-137

SCOPE OF DELIVERY:
✔ 2x fork seal rings
✔ 2x dust caps