Oil filler plug clutch cover gasket SET Sachs 50 S SW 50/5 AKF WKF 501 (round cover)

Here you will find your suitable spare part!

"Sachs engines"! A term that stands for quality and reliability. Initially, the "Fichtel & Sachs AG" produced bicycle hubs and ball bearings. It was not until the 1930s that the production of two-wheel engines became a success story. Since then, engines from Fichtel & Sachs have been installed in many models from well-known two-wheeler manufacturers.

Is your engine leaking oil? Then probably seals at the clutch cover are leaking. Here you get a set with all the necessary spare parts to reseal your clutch cover. With the two supplied
copper sealing rings are used to seal the oil drain plug and the oil check screw. The clutch cover gasket is installed between the engine case and the engine cover. In addition, this set contains two new
Clutch cover plug screws including sealing rings to seal the two openings through which the clutch is adjusted and the oil is filled.

ZS Note: Please note that there are different engine cover shapes on these engines. This set is suitable for engines with round covers, which have two equally sized screw plugs installed.

Rely on quality and accuracy of fit! Decide now for your suitable spare part!

Hercules / Sachs original/comparison number:
- 0240 140 207 (screw plug)
- 0250 131 000 (sealing ring)
- 0250 125 000 (clutch cover gasket)
- 0250 112 100 (copper sealing ring small)
- 0230 015 000 (copper sealing ring large)

TECHNICAL DATA:
Oil plug/sealing plug
- thread: M14 x 1
- material: weatherproof plastic
- color: black

Sealing ring
- Dimensions: 11,6 x 1,8 mm
- Material: rubber

Clutch cover gasket
- Material: paper gasket
- thickness: 0,3 mm

Copper gasket small
- Dimensions: 6,5 x 9 x 1 mm
- Material: copper

Copper sealing ring large
- Dimensions: 10,5 x 14 x 1
- Material: copper

SCOPE OF DELIVERY:
- 2x screw plug
- 2x rubber sealing ring
- 1x clutch cover gasket
- 1x copper sealing ring small
- 1x copper sealing ring large