Oil filler plug clutch cover gasket SET Hercules K50 SB KX5 XE5 ZX1 MK Supra 4 (round cover)

You can find the perfect spare parts for your Hercules here!

The company "Hercules" was founded in 1886 by Carl Marschütz as Velozipedfabrik Carl Marschütz & Co. and produced bicycles in the early years until 1928. It was not until 1928 that the production of motorcycles with an engine capacity of less than 200 cm³ became profitable again. All engines of the Hercules two-wheelers were made by Fichtel & Sachs.

Your engine is leaking oil? Then probably seals on the clutch cover are leaking. Here you get a set with all necessary spare parts to reseal your clutch cover. With the two supplied
copper sealing rings are used to seal the oil drain plug and the oil check screw. The clutch cover gasket is installed between the engine case and the engine cover. In addition, this set contains two new
Clutch cover plug screws including sealing rings to seal the two openings through which the clutch is adjusted and the oil is filled.

ZS Note: Please note that there are different engine cover shapes on these engines. This set is suitable for engines with round covers, which have two equally sized screw plugs installed.

Secure the right spare part for your bike now!

Hercules / Sachs original/comparison number:
- 0240 140 207 (screw plug)
- 0250 131 000 (sealing ring)
- 0250 125 000 (clutch cover gasket)
- 0250 112 100 (copper sealing ring small)
- 0230 015 000 (copper sealing ring large)

TECHNICAL DATA:
Oil plug/sealing plug
- thread: M14 x 1
- material: weatherproof plastic
- color: black

Sealing ring
- Dimensions: 11,6 x 1,8 mm
- Material: rubber

Clutch cover gasket
- Material: paper gasket
- thickness: 0,3 mm

Copper gasket small
- Dimensions: 6,5 x 9 x 1 mm
- Material: copper

Copper sealing ring large
- Dimensions: 10,5 x 14 x 1
- Material: copper

SCOPE OF DELIVERY:
- 2x screw plug
- 2x rubber sealing ring
- 1x clutch cover gasket
- 1x copper sealing ring small
- 1x copper sealing ring large