-
Moped parts
- Moped drive parts
- Moped exhaust
- Moped lighting
- Moped brake technology
- Moped electrics
- Moped engine parts
- Moped frame & chassis
- Moped Tires & Rims
- Moped Speedometer & Attachment Parts
- Moped fairing parts
- Moped accessories
- Moped parts by engine
Revision set large for Kreidler Florett egg tank LH LF 3-speed engine
Prices incl. VAT plus shipping costs
Unfortunately, this item is already sold out due to high demand.
Further variants / accessories
- Item no: 168136
- EAN: 4060861176937
- Manufacturer: Citomerx
- Manufacturer no.: 168136
Kreidler original/comparison number:
15.21.20 (housing gasket)
15.10.02 (Clutch cover gasket)
15.03.05 (cylinder head gasket)
15.63.64 (cylinder base gasket)
15.63.61 (intake port gasket)
00.76.51 (WeDi kick starter shaft)
00.76.53 (WeDi crankshaft)
00.77.50 (WeDi main shaft)
00.76.55 (WeDi foot control shaft)
00.76.06 (WeDi clutch shaft)
33.30.01 (WeDi shift shaft)
00.70.01 (Copper sealing ring)
00.63.00 (Bearing BO17)
00.61.00 (Bearing 6201 C3)
00.61.30 (bearing 6302 C3)
00.61.31 (bearing 6004 C3)
00.61.01 (bearing 6202 C3)
15.65.02 (needle bearing)
00.10.36 (screw M6x80)
00.10.37 (screw M6x70)
00.10.58 (screw M6x65)
00.10.59 (screw M6x85)
00.10.39 (screw M6x25)
00.16.11 (screw M6x40)
00.16.12 (screw M6x35)
00.20.10 (nut M6)
00.43.57 (spring washer M6)
00.43.57 (spring washer M6)
00.30.03 (washer M8)
00.20.16 (nut M8)
08.11.03 (spark plug)
00.22.03 (stud bolt M6)
00.22.00/00.22.04 (stud bolt M8)
TECHNICAL DATA:
- suitable for Kreidler 3-speed engine
- color: multicolor
- Installation note 1: Depending on the engine, one / two bolts may remain.
- Installation note 2: Cut off the web at the crankshaft connecting rod before installation.
Seal kit:
- Stud hole spacing: 44 mm
- Stud distance intake port gasket: 42 mm
- Intake port gasket passage: 17 x 26 mm
- Copper sealing rings: M12
Oil seal kit
- WeDI 1: 17x28x8 mm (2x crankshaft)
- WeDI 2: 15x24x7 mm (main shaft)
- WeDI 3: 20x30x7 mm (2x pedal shaft)
- WeDI 4: 14x22x5 mm (foot shift shaft)
- WeDI 5: 13x22x5 mm (clutch shaft until 1963)
- O-ring: 14x2 mm (2x shift shaft)
Bearing set
- Bearing 1: 6004 C3 / 20x42x12 mm / open / SKF
- Bearing 2: 6201 C3 / 12x32x10 mm / open / SKF
- Bearing 3: 6202 C3 / 15x35x11 mm / open / SKF
- Bearing 4: 6302 C3 / 15x42x13 mm / open / SKF
- Bearing 5: 2x BO17 / 17x44x11 mm / brass cage
- needle bearing: 14x18x13 mm
Screw set
- 58-piece screw set
- Material: steel 8.8 galvanized
Gear oil
- Specification: SAE80W-90
- Content: 1 liter
Spark plug
- Type: W7AC
- Thread: M14
- Thread length: 12,7 mm
- Contact: Ignition cable M4 thread with screw-on SAE nut
Stud cylinder
- Thread: M8
- length: 95 mm
Stud bolt exhaust/inlet
- Thread: M6
- Length: 26 mm
SCOPE OF DELIVERY:
- 1x Revision set large
Product type: | Revision set large |
Copper sealing rings: | M12 |
Stock 3: | 6202 C3 / 15x35x11 mm / offen / SKF |
WeDI 3: | 20x30x7 mm (2x pedal shaft) |
Bearing 4: | 6302 C3 / 15x42x13 mm / offen / SKF |
Stud bolt exhaust/inlet: | M6 x 26 mm |
WeDI 4: | 14x22x5 mm (foot control shaft) |
Installation note 1: | Je nach Motor können ein / zwei Schrauben übrig bleiben. |
Bearing 5: | 2x BO17 / 17x44x11 mm / Messing-Käfig |
WeDI 5: | 13x22x5 mm (clutch shaft up to 1963) |
Installation note 2: | Steg beim Kurbelwellenpleuel vor Einbau abschneiden. |
Stud bolt cylinder: | M8 x 95 mm |
Bearing 1: | 6004 C3 / 20x42x12 mm / offen / SKF |
Stud distance intake manifold seal: | 42 mm |
Spark plug: | Bosch W7AC / M14 / mit aufschraubbarer SAE-Mutter |
O-ring: | 14x2 mm (2x selector shaft) |
Gear oil: | Spezifikation: SAE80W-90 / 1 Liter |
Hole spacing stud bolt: | 44 mm |
Screw set: | 58-teilig / Stahl 8.8 verzinkt |
WeDI 1: | 17x28x8 mm (2x crankshaft) |
Bearing 2: | 6201 C3 / 12x32x10 mm / offen / SKF |
Intake manifold gasket passage: | 17 x 26 mm |
WeDI 2: | 15x24x7 mm (main shaft) |
Color: | Multicolored |
Reference number(s) OEM: | 00.10.58 (screw M6x65) / 00.10.59 (screw M6x85), 08.11.03 (spark plug) / 00.22.03 (stud bolt M6), 00.10.36 (screw M6x80) / 00.10.37 (screw M6x70), 00.22.00/00.22.04 (stud bolt M8), 00.10.39 (screw M6x25) / 00.16.11 (screw M6x40), 00.30.03 (washer M8) / 00.20.16 (nut M8), 00.16.12 (bolt M6x35) / 00.20.10 (nut M6), 00.43.57 (spring washer M6) / 00.43.57 (spring washer M6) |
Needle roller bearing: | 14x18x13 mm |
Scope of delivery: | 1x revision set large |
Manufacturer number: | 168136 |
Country and region of manufacture: | Sweden |
Reference number(s) OE: | 00.76.51 (WeDi kickstarter shaft) / 00.76.53 (WeDi crankshaft), 15.21.20 (housing gasket) / 15.10.02 (clutch cover gasket), 15.03.05 (cylinder head gasket) / 15.63.64 (cylinder base gasket), 15.63.61 (Intake manifold gasket), 00.70.01 (copper sealing ring), 00.77.50 (WeDi main shaft) / 00.76.55 (WeDi foot control shaft), 00.76.06 (WeDi clutch shaft) / 33.30.01 (WeDi gearshift shaft), 00.63.00 (bearing BO17) / 00.61.00 (bearing 6201 C3), 00.61.01 (bearing 6202 C3) / 15.65.02 (needle roller bearing), 00.61.30 (bearing 6302 C3) / 00.61.31 (bearing 6004 C3) |
Offer package: | Yes |
Description of the package content: | Motor revision set |
Manufacturer warranty: | 2 years |
Suitable for: | Kreidler 3-speed engine |
ZS 2Radteile GmbH
Unterbibracherstr. 3
95519 Vorbach DEU
Web page https://www.citomerx.de
Email: info@zweiradteile.net

"Fast goods", is the translation of Citomerx and this is also the motto of the company from Bavaria, which offers numerous spare parts for two- and four-stroke scooters. Speed is the declared goal for both the vehicles and the delivery of the goods, as well as a reasonable price-performance ratio for the standard, racing or high-end products. The range includes almost everything that the scooter rider needs: from exhaust systems and batteries to cylinder kits. An additional plus point is the know-how of the Citomerx crew, acquired over years of experience.