Petrol tap set, M12 x 1, outlet left, without water bag, metal lever + filter, hose and clips

Citomerx Fuel Tap Set M12 x 1

DESCRIPTION:
You want to take your moped out, but it always runs down when you start?
Check your fuel tap regularly. The fuel tap is located in the fuel line between the fuel tank and the carburettor. It must be opened and closed by hand.
The simple design of the fuel tap makes it hardly susceptible to faults. However, the fuel tap is not immune to wear. For example, the seals can harden, dry out or become brittle. The seals suffer and no longer hold properly tight. Fuel can then leak out of the petrol tap or false air can get into the system.
Get this brand new fuel tap at a low price!

TECHNICAL DATA:
- Outlet: left
- Thread: M12 x 1
- without water separator (water bag)
- with pre-filter strainer
- Metal lever
- 3 positions:
bottom - open
left - reserve
right - closed

suitable e.g. for:
Hercules - mopeds M3, M4, M4S, M5, M5S, MF 1, MF 2, Prima 2N - mopeds MP 1, Supra 2 D
Puch - Mopeds X30, X30A, X40, X50 - Mopeds X50
Tomos - Mopeds A3, A35
many other mopeds and scooters, e.g. from Kreidler, Zündapp, NSU, DKW, Miele, Mars, Rex, MCB, etc.

SCOPE OF DELIVERY:
- 1x petrol tap fuel tap, M12 x 1, outlet left, without water bag, metal lever.
- 1x petrol filter 6mm
- 1m fuel hose
- 4x hose clamp