Presto aluminium putty 250g

Filling filler for the automotive sector

DESCRIPTION:
presto Alu-Spachtel is a two-component polyester metal filler, as a mixture of a medium-elastic, highly reactive, amine-pre-accelerated polyester resin with various environmentally friendly fillers and aluminium pigments. It can be used as a filler for car repair, mechanical engineering and hobby work. Wherever a large area of warping is required. Surfaces such as metal, wood, various plastics or concrete can be easily filled in the required layer thickness. Holes are filled and levelled out, thin areas are stabilized. We recommend our presto sandpapers for preparing and finishing the filler work. We have a wide range of fine to coarse dry and wet sanding papers available for you.

QUALITY AND PROPERTIES:
- Easy processing
- High elasticity
- Highly thixotropic, therefore particularly good large-area and non-porous distortion
- Easy to grind
- Very good adhesion
- Asbestos and silicone free
- Short curing time
- Resistant to weak acids, weak alkalis; blowing agents, solvents, water and de-icing salts

TECHNICAL DATA:
- Base: Polyester resin with mineral fillers and aluminium pigments
- color: grey
- Smell: of styrene
- Form: pasty, soft, thixotropic
- Pot life/processing time at 20°C: approx. 5 - 6 min.
- Processing temperature: from 12°C
- Drying (at 20°C, 50% relative humidity): Sandable after: approx. 30 minutes

SCOPE OF DELIVERY:
✔ Presto Aluminium putty 250g