Presto 2K epoxy resin 1000g
Prices incl. VAT plus shipping costs
IN STOCK - Delivery time 1-3 working days
Last article - Buy now
- Item no: PR600593
- EAN: 4048500600593
- Manufacturer: Presto
- Manufacturer no.: 600593
Presto Epoxy Resin - 2K
DESCRIPTION:
Presto Epoxy Resin is a 2-component, solvent-free, low viscosity, transparent repair, coating, laminating and potting resin.
AREAS OF APPLICATION
- For repairing, bonding and coating of porous and smooth surfaces
- As impregnating resin for fiber-reinforced coatings and molded parts
- As a potting compound for circuits and other cavities
- For the production of waterproof coatings, e.g. liquid-impermeable coatings for gutters, pipes and troughs
- For the production of particularly strong and lightweight GRP moldings: Together with a fiber reinforcement, suitable for linings and hoods in vehicle, apparatus and model construction.
- All work with wood
- Coating of concrete floors
- Repairs to boats, motor vehicles and other molded parts.
QUALITY AND PROPERTIES:
- The resin cures tack-free on the surface facing the air. - High strength, very high adhesion
- Very water resistant, low water absorption
- Low shrinkage during curing
- Solvent free, therefore low odor
- Resistant to weak acids, weak alkalis; inorganic salt solutions, petrol & petroleum, greases and oils
- Processing even at relatively low temperatures (min. 10°C)
TECHNICAL DATA:
- Base: epoxy resin
- Color: A-component clear; B-component yellowish transparent
- Odor: A-component slightly aromatic, B-component amine-like
- Pot life/processing time at 20°C: approx. 30 min. / At lower temperatures (minimum 10°C) pot life and curing time are extended. For larger batches, the processing time is shortened due to higher heat generation.
- Working temperature: from 12°C
- Consumption per application: for coatings in pure form approx. 250 g/m²; suitable for casting in layers up to 3 cm.
- Drying (at 20°C, 50% relative humidity): Sandable after: approx. 12 hours. / Final surface hardness is reached after approx. 3 - 5 days.
- Increased chemical resistance and strength is achieved by subsequent annealing at 50°C for 24 hours.
- Flash point: A-component 135°C, B-component >100°C
- Density at 20°C: A component 1.1 g/cm³, B component 1.04 g/cm³
- Viscosity: A-component approx. 1000 mPa.s; B-component approx. 700 mPa.s; mixed viscosity: approx. 950 mPa.s
- Specific gravity: A-component 1.15 g/cm³; B-component 1.0 g/cm³
- Temperature resistance of the cured material: 70°C
- Compressive strength: 70 N/mm²
- Tensile strength: 19 N/mm²
- Flexural strength: 57 N/mm²
- Shore D hardness: approx. 80
- Hardener addition: A-component (base) : B-component (hardener) = 100 : 60 parts by weight or 100:70 parts by volume
- Shelf life/storage: 24 months when stored properly (=10°-25°C, relative humidity of max. 60%) in closed original container. Hardener loses slightly in effectiveness with increasing storage time; therefore minimal increase of drying time possible. Protect from direct sunlight, frost and moisture.
GTIN: | 4048500600593 |
Manufacturer number: | PR600593 |
Presto products form the perfect one-stop repair system for paint preparation, underbody protection, cleaning, protection and care through to painting. The Presto products are suitable for countless applications on motorcycles and cars, whether scratches or grooves, cracks and fractures, squeaks or creaks, rust or stubborn dirt, paint repair or paint care - in the Presto system you are guaranteed to find what you need to maintain the value of your vehicle.