Presto fiberglass putty 250g

Two-component polyester putty

DESCRIPTION:
presto Fibreglass Filler is a two-component polyester filler and contains the new bonding agent NT. The filler consists of pure, unsaturated polyester resin and glass fibre parts. For repairing larger damaged areas in industry and hobby areas, which already show rusting through and are exposed to special mechanical stress. Can be used on metal, wood, concrete, many plastics, etc. Perforations can be bridged and stabilized, larger unevenness can be filled. Suitable for the repair of rust penetration up to a diameter of 12 mm. Perforations with a diameter larger than 12 mm can be filled with prestolith special polyester resin before use. We recommend our presto sanding papers for the preparation and finishing of the filler work. We have a wide range of fine to coarse dry and wet sanding papers available for you.

QUALITY AND PROPERTIES:
- The newly developed bonding agent NT guarantees a particularly good adhesion.
- The elastic resin used enables it to be used even on surfaces that are exposed to tension and stretching forces.
- Easy processing
- Easy to grind
- Very good adhesion
- Asbestos and silicone free
- Short curing time
- Resistant to weak acids, weak alkalis; blowing agents, solvents, water and de-icing salts

TECHNICAL DATA:
- Base: Polyester resin with mineral fillers and glass fibre parts
- Color: grey-green
- Smell: of styrene
- Form: pasty, soft, thixotropic
- Pot life/processing time at 20°C: approx. 5 - 6 min.
- Processing temperature: from 12°C
- Drying (at 20°C, 50% relative humidity): Sandable after: approx. 30 minutes

SCOPE OF DELIVERY:
✔ Presto glass fiber putty 250g