DellOrto carburetor 04131 PHBH 28 NS for Cagiva Super City Kat (Switzerland) BJ 1992 125 ccm

With an original Dell'Orto carburetor, you get quality at the highest level.

In principle, the various carburetors can be freely interchanged. The size of the passage essentially determines the quantity of the fuel-air mixture and must be selected according to the corresponding engine capacity. The engine and air-side connections can usually be adapted using adapters.

The carburetors of the PHB series are among the most common models in the 50-125cc class. PHB carburetors are used on the majority of mopeds, mopeds and scooters. They are the standard for Minarelli engines.

Technical data:

Type PHBH Var. N with 28 mm passage, separate lubrication:
- Adjusting screws left
- Flange connection rubber Ø36mm
- Angled throttle cable
- Folding choke
- Air filter connection

equipped with:
- Air filter connection 10001-82
- Throttle slide 13112-40
- Carburetor needle X 9477-58
- Main atomizer DV1 13113-262
- Main jet 6413-130
- Secondary jet 11600-70
- Idle jet 1486-38
- Starter jet 7746-65
- Needle valve 9436-200
- Float 9010-01, 9,5gr

Suitable for the following models:
This carburetor is used exactly in this configuration (jets, atomizer, connections, etc.) in the following models: Cagiva Super City Kat (Switzerland), BJ 1992, 125 ccm, 1 cyl. - 2-stroke

Of course, the carburetor can also be used in other models. The air intake, the engine connection and the connection for the throttle cable and the choke may have to be adapted, and carburetors for 2 and 4-stroke engines should not be mixed. It is also important to check whether the carburetor is prepared for mixed or separate lubrication and whether any vacuum connections are required to control a fuel tap or an oil pump.