Twist Control Naraku Racing for scooters/quads with 105mm clutch and Minarelli engine or Nachabu (CPI

Naraku Twist Control Naraku Racing for Scooters/Quads DESCRIPTION: The resulting torsional forces in the converter of a variator cause friction, resulting in power transmission losses. To prevent this, you can install the innovative Naraku Twist Control, which uses a ball bearing to minimize friction. The result is more power across the entire rev range and thus better acceleration. TECHNICAL DATA: - Naraku Racing Twist Control for 50cc scooters and quads with 105mm clutches (2 shoes) in Minarelli engines or 2-stroke Chinese scooters with Minarelli replicas. - This design increases the preload of the counterpressure spring, corresponding to a spring that is approximately 15% harder. - Suitable for vehicles from original condition to high-end racing conversions. - When installing, lubricate the ball bearing sparingly (!) with heat-resistant bearing grease.