3x500ml Wagner tank sealant single component resin

Tank derusted - and now?

Quality is the top priority at Wagner Schmierstoffe. The sale of high quality lubricants, including oils, oil additives and greases is proof of this. The oils have been manufactured in our own production since 1994.

For sealing the inside of tanks made of steel, aluminium, stainless steel, copper, brass and plastics such as carbon, GFK, Kevlar, polyester or vinyl ester. Also suitable for new tanks, roughening is not necessary.

Do not give rust formation on the inside of the tank a chance and protect your tank from corrosion in the long term with Wagner single-component tank sealing resin.

TECHNICAL DATA:
- solvent-containing one-component polyurethane resin
- Made in Germany, developed and manufactured in Germany
- forms a petrol and acid-resistant long-term coating
- permanently flexible, seals small leaks (folds, welded seams, small holes)
- slow curing, therefore very easy to process
- 100% ethanol resistant, suitable for leaded and unleaded fuel

APPLICATION:
Empty used tanks, knock out coarse debris and blow out. Treat rust (easiest with the Wagner rust converter). Then fill the necessary amount of transparent WAGNER single-component resin into the tank, depending on the tank size, and shake it vigorously, then carefully swivel it out. The resin should completely wet all inner walls. After the first layer has dried and is no longer sticky (after approx. 12 - 24 hours), a second layer can be applied. After about 7 to 8 days the coating is completely cured. Even new tanks with smooth inner surfaces can be sealed with WAGNER single-component tank sealant, roughening is not necessary.

WAGNER one-component tank sealing resin seals tank interiors made of steel (also alloys), aluminium, stainless steel, copper, brass and plastics such as carbon, GFK, Kevlar, polyester or vinyl ester. The WAGNER one-component resin cannot be used for tanks made of polyethylene or polypropylene, as these materials cannot be permanently coated.

DOSING:
175 ml are sufficient for the internal tank treatment of up to 10 litres tank capacity
250 ml are sufficient for the internal tank treatment of up to 30 litres tank capacity
500 ml are sufficient for the internal treatment of up to 80 litres of tank capacity (60 litres for tanks with baffles)

SCOPE OF DELIVERY:
- 3x 500 ml Wagner single component resin for tank sealing


ATTENTION
May cause allergic skin reactions. Causes severe eye irritation. May be fatal if swallowed or inhaled. Causes skin irritation. Harmful by inhalation. Harmful to aquatic organisms, with long-term effects. Flammable liquid and steam. May irritate the respiratory tract. May cause allergy, asthma-like symptoms or breathing difficulties if inhaled. May cause cancer. May damage the central nervous system, lungs, kidneys and liver on prolonged or repeated exposure. Route of exposure: Inhalation.

Aromatic polyisocyanate prepolymer Reaction product of ethylbenzene and xylene Diphenylmethane diisocyanate, isomers and homologous hydrocarbons, C9, aromatics